Normally film sizing is simply done by actually making up some sample packages. To estimating film size can be done by general guidelines which may be used. Centerfold Film Sizing General sizing...
Films that wrapped a product are finally shrunk by the shrink tunnel. During the manufacture process, films will be oriented and retains a thermal memory. Stretch force was induced within the orien...
There are many basic shrink films characteristic. · Visual properties such as Clarity, Gloss and Haze, are first noticed by end-user and the buyer. A premium shrink films should hav...
There are two basic categories in the shrink film market; the polyvinyl chlorides (PVC) and the polyolefins (POF). Shrink polyethylene is not typically included in the competitive polyolefin c...
The seal pressure is critical during the sealing cycle. It can be controlled by three common methods: 1. Manual L-sealers with no magnetic hold down Seal pressure is applied by the op...
Shrink Films Orientation is employed in the films manufacturing process that make the films shrink significantly with application of heat. Film Types Polyolefin (POF) POF is a general term...
Need any help? You can contact us at +852 2693 0307 / +86 755 2893 7888, or
Email